Chapter 2: WEB Configuration
Illustrations contained in this document are for representation only.
52
1. 802.11b/g/n Radio
To set the basic configuration for the wireless features, click RADIO from the Wireless menu. These
must match the settings you make on your wireless-equipped PC on the LAN side.
Fig. 32 Gateway\Wireless\Radio
Interface
: The wireless radio in your gateway can be completely de-activated by changing
Interface
to
Disabled. Click the
Apply
button to save your settings. Activated by changing interface to enabled.
Wireless MAC Address
: The MAC address for this wireless device will be displayed in this field
automatically.
Output Power:
This setting decides the output power of this device. You may use it to economize on electricity
by selecting lower percentage of power output. Control the range of the AP by adjusting the radio
output power.
802.11 Band:
It can Support 2.4 GHz and 5 GHz exclusively.
802.11n mode:
It will help you to
Enable
or
Disable
the 11N mode. To enable you need to select
Auto
, to
disable you need to select
Off, and so force the AP to operate in 802.11g mode.
Bandwidth:
Select wireless channel width 20Mhz is for default value (bandwidth taken by wireless
signals of this access point.)
