Page 3 of 3
Assembly Instructions
Messina
TM
Chaise Lounge
Model #: 523115
Model #: 523150
1.
Attach the seat frame (C) to the front seat frame (A) using the two short screws (E) and washers (G). From underneath the
seat frame (C), insert the screws and washers through the holes in the bottom of the seat frame (C) into the holes in the front
seat frame (A). Tighten the screws using the hex key (K) and install two PVC screw covers (I). See
Figure2
.
Figure 2
2.
Attach the back frame (B) to the seat frame (C) by aligning the holes in the bottom of the back frame with the holes in the
brackets attached to the rim of the seat frame. Insert the long screws (D), through the holes in the brackets, plastic washers (F),
and back frame (B). Make sure the plastic washers (F) are in between the seat frame (C) and back frame (B). On the end of the
long screws (D) install the washers (G) and secure with the nuts (H). Tighten using the hex key (K) and hex wrench (L). Install
the PVC screw covers (I) and nut covers (J). See
Figure 3
.
Figure 3
3.
Place the seat cushion (N), back cushion (O), and pillow (P) on the chaise as indicated in
Figure 1
on
Page 1
.
! KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE !