7
H-belt
The Swifty rehabilitation buggy is supplied with a H-belt as standard. To adjust the length
of the belts, unzip the padded section of the belts then set the length as required.
Opening the belt fastener
To open the H-belt, hold down the red button
(1), open the clip connector (2 and 3) and
release the belt (childproof safety catch).
Adjusting the shoulder belt height
Open the H-belt and release the shoulder belts from the pelvic belt (4). Detach and fold
up the seat and back upholstery. Unscrew the screw fitting on the back plate using the
Allen key (3 mm) and remove the belts. Undo the stitching on the seam of the desired
height on the back upholstery. Pass the belts through the slit created and screw them
tight to the back plate, then re-attach the seat and back upholstery.
Removing the H-belt
Open the belt fasteners completely, detach and fold up the seat
and back upholstery. Unscrew the screw fittings on the back
plate and the back of the seat area using the Allen key (3 mm)
and remove the belts.
Upholstery
The upholstery can be quickly and easily
removed. The material and the spacer fabric
are high quality materials that are washable up
to 40°C. The upholstery is fire-retardant.
Please remember that even high-quality
materials are subject to fading through
longterm exposure to intense sunlight or
repeated washing.
1
2
4
4
3