10
Purpose and use
The chassis is, in association with a compatible / convenient seat-system for egonomic transfer of disabled children,
suitable for indoor use.
Risks and contraindications
Proper handling may avoid any use-related risks. No contraindications are known.
Technical data
Seat tilt-in-space
-7 to +31°
Seat height with seat unit
29 - 69 cm / 11.4 – 27.2"
Total dimensions
(l x w x h)
76 x 54 x 25 - 62 cm / 29.9 x 21.3 x 9.8 - 24.4"
Adapter height
21 - 60 cm / 8.3 – 23.6"
Size of swivel wheels
(front)
100 mm / 3.9"
Size of swivel wheels
(rear with brake)
100 mm / 3.9"
Weight
(without seat unit)
13.5 kg / 29.8 lb
Carrying capacity
50 kg / 110.2 lb
Setting up and assembly
The base frame is supplied already fully mounted and folded together. Loosen the locking pin at the foot pedal and lock
it by doing a quarter turn. You can now adjust the seat height and, if necessary, the seat tilt-in-space. (fig. 1-3)
Installing the seat unit size 1
The seat unit must be positioned centrally between the spacers. (Fig. 4a)
Installing the seat unit size 2
Before installing seat unit size 2 on the Q chassis, the four spacers on the seat adapter must be moved into the outer holes.
(Fig. 4b)
Folding
Bring the backrest to the maximum horizontal position, loosen the knee angles and swivel the footrest over and down
onto the seat unit (fig. 5). Move the seat tilt adjustment to a horizontal position and lower the seat unit down to the
ground (see seat height adjustment).
CAUTION:
Hold the frame with one hand when folding to avoid it tipping over. Be careful not to catch your fingers.
Seat height adjustment
The seat unit can be lowered down to the ground. Apply the
right
foot pedal at the back of
the base frame (fig. 1-3). Now push the seat unit down (at the back, the armrests or the push
bar, if available) or pull it upwards until the desired height is reached. To keep the height,
simply remove your foot from the pedal. The seat height can also be adjusted during use of
the chair. It may then be necessary for two people to lift the seat to the desired height. For
safety reasons the seat height adjustment can be locked. The adjustment is locked when the
locking pin to the left of the pedal is engaged (fig. 2). To unlock, pull out the locking pin and
do a quarter turn.
