GB
Make sure the appliance rests securely on all four wheels.
Open the housing cover.
To do this, grip the carrying handle. Press your thumb down on the
housing cover unlocking mechanism. Then lift up the housing cover.
Remove the AQUA-Pure filter box.
To do this, grasp the AQUA-Pure filter box by the handle.
Remove the AQUA-Pure filter box by lifting it out of the appliance.
For dry vacuuming, the wet vacuuming insert must be removed
from the waste water tank of the aqua filter.
Fill the waste water container of the AQUA-Pure filter box with 1 litre
of clean water.
If the wet vacuuming insert has already been removed,
the AQUA-Pure filter box can remain closed and you can fill
it directly through the upper port.
Insert the AQUA-Pure filter box in the appliance.
To do this, hold the closed AQUA-Pure filter box by the handle
and lower it into the appliance.
Close the housing cover.
To do this, grip the carrying handle. Then push down the housing
cover. Gently press the housing cover to the level of the unlocking
mechanism until you hear the cover latch into place.
Dry vacuuming with water filter technology
Dry vacuuming procedure
Never use the appliance for dry vacuuming if the aqua filter is not
properly installed. This could damage the appliance.
Do not vacuum large quantities of fine dust, e.g. flour,
cocoa powder, ash etc.
When delivered, the appliance is set up for dry vacuum operation.
1,0 l
7
THOMAS
THOMAS
THOMAS
THOMAS
