IS---0797
January 2010
Page 2 of 4
STEP 2
Remove the protective caps from the bushings of the
feed--thru.
PROTECTIVE CAPS MUST NOT BE ON THE BUSHINGS
OF THE FEED--THRU WHEN THE FEED--THRU IS
BEING USED. When the feed--thru is not in use, the
protective caps should be placed on the bushings of the
feed--thru to protect them from dirt and other contaminants.
Clean the bushing surfaces and lubricate them with the
lubricant supplied.
DO NOT SUBSTITUTE.
Other
lubricants may be harmful to this product and its mating
product(s).
Clean &
Lubricate
Clean &
Lubricate
STEP 3
Attach feed--thru eye firmly to hotstick.
Eye
Hotstick
STEP 4
Using a hotstick, slide feed--thru onto parking stand. Unlock
hotstick and back off, to allow space for eyebolt to be
tightened. Tighten eyebolt by rotating hotstick clockwise
until snug. DO NOT OVERTIGHTEN. Release hotstick.
FRONT VIEW
Parking
Strand
Eyebolt
Hotstick
Parking
Stand
To Ground
SIDE VIEW
