thomann Varytec Sidus X4 QUAD страница 14 Скачать руководство пользователя | Manualshive

Страница: 14 / 76

background image

NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage, never expose the device to any liquid or moisture. Avoid

direct sunlight, heavy dirt, and strong vibrations. Only operate the device within the ambient conditions specified in the chapter

‘Technical specifications’ of this user manual. Avoid heavy temperature fluctuations and do not switch the device on immediately

after it was exposed to temperature fluctuations (for example after transport at low outside temperatures). Dust and dirt inside can

damage the unit. When operated in harmful ambient conditions (dust, smoke, nicotine, fog, etc.), the unit should be maintained by

qualified service personnel at regular intervals to prevent overheating and other malfunction.

NOTICE!
Fire hazard due to exceedance of the maximum current
The device can power other devices of identical construction. The current consumption of all other devices connected in series must

not exceed the values indicated in the technical specifications. Otherwise you risk injuries and irreparable damages to the device.

Only connect so many identical devices that the maximum current consumption is not exceeded. Ensure the sufficient dimensioning

(wire cross section) of the power cables used for all devices connected in series.

NOTICE!
Possible staining
The plasticiser contained in the rubber feet of this product may possibly react with the coating of your surface and after some time

cause permanent dark stains. In case of doubt, do not put the rubber feet directly on the surface and use a suitable underlay if neces‐

sary, i.e. felt-pad floor protectors or similar.

Safety instructions

14

Sidus X4 QUAD

LED PAR

«
...
12
13
14
15
16
...
»

Содержание Varytec Sidus X4 QUAD













































































Отзывы:

Нет отзывов

Похожие инструкции для Varytec Sidus X4 QUAD

Бренд: Marantz Страницы: 2

Бренд: Optoma Страницы: 67

Бренд: ViewSonic Страницы: 2

Бренд: Liesegang Страницы: 52

Бренд: ADJ Страницы: 4

Бренд: M-system Страницы: 3

L-com SRCN-C266

Бренд: Infinite Страницы: 3

Бренд: Dukane Страницы: 6

Бренд: Acer Страницы: 57

Бренд: Panasonic Страницы: 323

Бренд: Panasonic Страницы: 240

Бренд: Faroudja Страницы: 40

ED-S3170 series

Бренд: Hitachi Страницы: 64

Бренд: Hitachi Страницы: 2

Бренд: Hitachi Страницы: 78

Бренд: Hitachi Страницы: 82

Бренд: Hitachi Страницы: 201

Бренд: Hitachi Страницы: 202

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды