thomann Varytec LED Studio Par Rookie COB 100W, Руководство пользователя

Страница: 28 / 48

Press [MENU] repeatedly until the display shows ‘CH8’ or ‘CH6’ . Now use the arrow buttons to
select one of the following DMX modes:
n ‘CH6’ (6 channel DMX mode)
n
‘CH8’ (8 channel DMX mode)
When the display shows the desired value confirm the selection with [ENTER] .
This setting is only relevant when the device is controlled via DMX.
Press [MENU] repeatedly until the display shows ‘A001’ . Use the arrow buttons to select a value
between 1 and 512 (display shows ‘A001’ … ‘A512’ ) to assign a DMX address. When the display
shows the desired value confirm the selection with [ENTER] .
This setting is only relevant when the device is controlled via DMX. If no DMX controller is con‐
nected, ‘A’ flashes in the display.
Press [MENU] repeatedly until the display shows ‘CC01’ to set the colour change speed. Use
the arrow buttons to select a value between 01 and 99 (display shows ‘CC01’ … ‘CC99’ ). When
the display shows the desired value confirm the selection with [ENTER] .
This setting is only relevant if the device is not controlled via DMX.
DMX mode
DMX address
Colour change
Operating
28
LED Studio Par Rookie COB 100W
LED PAR