thomann Varytec Hero Wash 300 TW, Руководство пользователя

Страница: 19 / 40

This setting is only relevant if the device is not controlled via a DMX controller and
not working as slave in a master / slave configuration. In this operating mode pan,
tilt, zoom, effects and colours can be set.
1.
Press [SET] to activate the main menu.
2.
Press [UP] or [DOWN] until the display shows ‘Running Mode’ and confirm the
selection with [SET] .
3.
Press [UP] or [DOWN] until the display shows ‘Manual Control’ and confirm the
selection with [SET] .
4.
Press [UP] or [DOWN] to select the desired submenu or the desired value and
confirm the selection with [SET] .
The following sub menus are available:
Menu level 3 Menu level 4 Description
‘PAN’ ‘000…540’ Adjusts the rotation angle.
‘TILT’ ‘000…240’ Adjusts the tilt angle.
‘Pan/Tilt Speed’ ‘000…255’ Adjusts the speed of pan and tilt.
‘Zoom’ ‘000…255’ Adjusts the initial setting of the
light bundling.
‘Dimmer’ ‘000…255’ Adjusts the dimmer intensity.
‘Strobe’ ‘AC 0 … 30Hz’ Adjusts the strobe frequency.
‘Ring1 WW’ ‘000…255’ Sets the intensity for warm white
segment 1 (0 to 100%).
‘Ring1 CW’ ‘000…255’ Adjusts the intensity for cold
white Segment 1 (0 to 100%).
‘Ring2 WW’ ‘000…255’ Sets the intensity for warm white
segment 2 (0 to 100%).
‘Ring2 CW’ ‘000…255’ Adjusts the intensity for cold
white Segment 2 (0 to 100%).
‘Ring3 WW’ ‘000…255’ Sets the intensity for warm white
segment 3 (0 to 100%).
‘Ring3 CW’ ‘000…255’ Adjusts the intensity for cold
white Segment 3 (0 to 100%).
‘ColorTemperature’ ‘OFF’ The setting of the intensity for
warm white and cold white is
done by setting the individual
segments.
‘2500K…6100K’ Sets the colour temperature for
all three segments.
Manual control
Operating
Hero Wash 300 TW
19
moving head