thomann The t.mix 20.12, Руководство пользователя, Страница: 18 / 32

6.2 Parametric Equalizer
For each input channel and each output channel, a parametric equalizer with four
frequency bands plus high-pass and low-pass filters can be switched on.
1.
Tap the ‘PEQ / GEQ’ button to change to the ‘PEQ’ function.
2. Press one of the [CH] buttons for an input channel, one of the [AUX] buttons for
an output channel, or the buttons [FX 1] or [FX 2] .
Alternatively: Tap on the ‘Select Channel’ button and select the desired input
channel or output channel on the display surface. Confirm the selection with
‘Enter’ .
ð
The button for the selected input channel or output channel lights up blue.
The desired input channel or output channel is shown in the display.
3. Tap on ‘EQ1’ , ‘EQ2’ , ‘EQ3’ , ‘EQ4’ to select the frequency band.
ð
The selected frequency band lights up.
4. Adjust the desired values by moving the slider on the display.
5. Save the settings with ‘Save’ .
You can save up to 48 individual settings.
Alternatively: Use the rotary controllers
[Type] , [Q Shape] , [Gain] and [Freq] to
adjust the desired values for filter type, Q shape, boost / cut and the centre fre‐
quency.
The ‘Flat EQ’ button can be used to cancel the settings made. The frequency
response is then back in the initial state.
The
‘ON/OFF’ can be used to turn the EQ on of off. By default, the EQ is turned on.
Option Selection range Meaning
‘Frequency HPF’ 20.6 Hz – 20.0 kHz High-pass filter frequency
‘Type’ Bypass, BS6, BW12, BS12,
LR12, BW18, BS18, BW24,
BS24, LR24, BW30, BS30,
BW36, BS36, LR36, BW42,
BS42, BW48, BS48, LR48
Type and slope rate of the filter
‘Low-pass filter frequency’ 20.0 kHz – 20.6 Hz Low-pass filter frequency
‘Type’ Bypass, BS6, BW12, BS12,
LR12, BW18, BS18, BW24,
BS24, LR24, BW30, BS30,
BW36, BS36, LR36, BW42,
BS42, BW48, BS48, LR48
Type and slope rate of the filter
‘Frequency EQ 1–4’ 20.6 Hz – 20.0 kHz Frequency of EQ bands 1–4.
‘Type’ Bell, Hi-shelf, Lo-shelf Filter type
Operating
mixer
18