thomann the t.amp S-100 MK II, Руководство пользователя

Страница: 21 / 40

20 0.77V | 1.4V | 26dB
The input sensitivity at which the amplifier is delivering its full rated power, can be
set with this switch between 0.775 V
RMS
and 1.4 V
RMS
). Often multiple amplifiers are
used simultaneously. In this case, switch to the ‘26 dB’ position, the signal will then
be amplified by all amps equally. Thus, you can combine different power amps of
the S-series, and always get the same output level.
21 CH-1 (MONO)
Connect the line-level signals to be amplified to the XLR input of Channel 1 using a
XLR cable.
22 CH-1 (MONO)
Connect the line-level signals to be amplified to the 1/4" balanced TRS phone jack
input of Channel 1 using a 1/4" phone jack cable.
23 Power supply switch
Before connecting the amplifier to the mains power supply, ensure that the mains
voltage switch on the bottom side (or rear side for S-150) is in the position that cor‐
responds to the actual power available (in Germany 230 V~). f in doubt, consult an
electrician.
Connections and operating elements
S-75 MK II, S-100 MK II, S-150 MK II
21