thomann The Box Pro Achat 212 Sub-LM, Руководство пользователя

Страница: 16 / 24

With this wiring option, you can connect the bass directly using a two-wire cable (wires 1+/1–).
If you are using four-wire cables, you can use heads that receive their signal via wires 2+/ 2–
and loop wires 1+/ 1– through. The bass is connected to wires 1+/1– and loops wires 2+/ 2–
through. The order in which the speakers are wired doesn't matter. Never fall below the min‐
imum load impedance, though.
The adjoining figure shows the pin assignment of the lockable NL4 panel connectors. NL4 mounting connectors for
speaker connections
Installation
passive mid/low-range speaker
16