thomann TA 1050 MK-X, Руководство пользователя

Страница: 17 / 44

1 [POWER]
Main switch to turn the device on and off.
2 [CH-A/B]
Controls for input gain of channels CH-A and CH-B.
3 LED indicators for channels CH-A/B
These LEDs indicate the ready status of the device ( [Power] ), the input signal level ( [Signal] ), channel overdrive ( [Clip] )
and a fault condition ( [Fault] ).
The [Power] LED is permanently lit during operation. The [Signal] LEDs respond to the
input signal. If one of these LEDs is lit without an input signal being present, discon‐
nect the loudspeakers from the power amplifier and turn the input gain control knobs
of channels CH-A and CH-B to their minimum levels. If the LEDs are still permanently
lit, the device must be checked by an authorized technical service centre.
Connections and controls
TA 450 MK-X TA 600 MK-X TA 1050 MK-X TA 1400 MK-X TA 2400 MK-X
17