thomann T.Bone IEM 150, Руководство пользователя

Страница: 23 / 56

Press simultaneously on the two side closures on the battery compartment, pull it gently
downwards and then fold it completely up. Insert the batteries. Pay attention to the correct
location of the poles.
Fold the battery compartment closed until it engages.
4.4 Taking system in operation
1.
Ensure that the transmitter and receiver are switched off. The display on the transmitter
is dark; on the receiver, the main switch / volume control is in the "–" position.
2.
Attach the receiver with the clip to your belt or guitar strap.
3.
Carefully insert the ear phones into the ear canal, note the markings ‘L’ and ‘R’ for the left
and right side.
4.
Connect the ear phones to the receiver.
5.
Switch the transmitter on by pressing the main switch and the receiver by turning the
main switch / volume control and test the transmission. Make sure that transmitter and
receiver are set to the same frequency group and channel. If necessary, adjust the ampli‐
fication of the transmitter and receiver and the levels on your mixing console or your
amplifier.
Installation
IEM 150
23