thomann Swissonic PA 3, Руководство пользователя

Страница: 22 / 36

1 LED panel
[POWER] This LED shows that the device is turned on.
[PROTECT] Lights up when one or more protective circuits have tripped or the device is defective.
[CLIP] Lights up when the channel is overdriven. In this case, use the [INPUT GAIN] control to reduce the
signal level until the LED goes out again.
[SIGNAL] Indicates the presence of an input signal. The higher the signal level, the faster the LED flashes.
2 [POWER]
Mains switch. Switches the device on and off.
Connections and controls
power amplifier
22