thomann Swissonic CDMP 1, Руководство пользователя

Страница: 3 / 8

3
Risk of explosion!
Do not throw batteries into a fire, do not recharge the batteries. •
Never open batteries, never solder or weld batteries. The risk of explosions and injuries exists! •
Regularly check the condition of the batteries. Leaking batteries can cause damage to the remote •
control.
If you do not intend to use the remote control for an extended period, remove the batteries.
•
In the event of the batteries leaking acids, wear protective gloves and clean the battery •
compartment and the battery contacts with a dry cloth.
Remote control (RC)
Open the battery compartment cover on the rear side of the RC handset and insert 2 x 1,5 batteries
(AAA size) according to the polarity layout engraved. Then close the compartment. Point the RC
towards the unit when operating these functions:
1.
<
- press once to stop playback, press
4;
to resume playback at the same location,
press twice to stop playback completely,
press
4;
to resume playback at the
beginning of the disc.
2. - numeric buttons to call up tracks
directly
3. PROGRAM - to activate the program function
4. PITCH+
- to increase speed and pitch of playback
5. SGL/CTN - to toggle between single track playback
and continuous playback of the disc
6.
:
- skips to the next track
7.
8
- fast forward in steps of 5 seconds
8.
9
- skips to the previous track
9. RELOOP - skips playback to the beginning of
a loop
10. LOOP OUT - press once to set the end of a loop,
press twice to end loop playback
11. LOOP IN - to set the beginning of a loop
12.
7
- fast backward in steps of 5 seconds
13. TIME - toggles the display mode for playing time
14. CUE - skips playback to the beginning of the
current track
15. PITCH— - to reduce speed and pitch of playback
16. PITCH - to activate or deactivate the pitch
function
17. - to eject the disc from the slot