thomann STARVILLE PAR56 10MM UV LED-PAR, Руководство пользователя

Страница: 27 / 44

Press [M] . Press one of the arrow keys repeatedly until the display ‘DMX’ . Press [OK] . Now you
can set the number of the first DMX channel to be used by the device (DMX address). Use the
arrow keys to select a value between 1 and 512 (the display shows ‘A001’ … ‘A512’ ).
When the display shows the desired value, press [OK] to confirm the selection. Then press [M]
to return to the higher menu level. To return to the higher menu level without changes, press
[M] .
Make sure that this number matches the configuration of your DMX controller. The highest
possible start address for the 2-channel DMX mode is 511.
Press [M] . Press one of the arrow keys repeatedly until the display shows ‘TEST’ . Press [OK] .
This operating mode can be used to test the strobe effect speed ( ‘STRO’ ) and the dimmer set‐
ting ( ‘DIMM’ ), to change both settings and to operate the device in stand-alone mode.
DMX address
Manual test
Operation
PAR56 10MM UV
27