thomann Starville EP1080, Руководство пользователя, Страница: 36 / 60

Press [MENU] repeatedly until the display shows ‘bLNd’ . Press [ENTER] . Now use and to
blackout the LEDs ( ‘YES’ ) or to turn them back on again ( ‘no’ ).
Press [ENTER] to apply the settings. Press [MENU] for about one second or wait for about eight
seconds to close the menu without changes.
A constant unicoloured pattern can only be activated when the unit is operating in stand
alone mode or as master in a master / slave combination. This setting is only relevant if the
device is not controlled via DMX.
Press
[MENU] repeatedly until the display shows ‘CoLo’ .
Press [ENTER] . Now use and to choose between one of 16 pre-defined colours (display
shows ‘Co 1’ … ‘Co16)’ ) and one user-defined mixed colour (display shows ‘MAnU’ ). If you
have chosen the user-defined mixed colour press [ENTER] . Now you can specify how the mixed
colour is composed of the three primary colours red, green and blue. Here you can set a range
of 0 (dark) to 255 (full brightness) for each primary colour.
Press
[ENTER] to apply the settings. Press [MENU] for about one second or wait for about eight
seconds to close the menu without changes.
Blackout
Constant unicoloured pattern
Operating
LED floodlight
36