thomann Stairville Wild Wash Pro 648 LED White DMX, Руководство пользователя

Страница: 31 / 80

This setting is only relevant if the device is controlled via a DMX controller.
Press
[MODE] repeatedly until the currently set DMX address appears in the display ( ‘Axxx’ )
and press [ENTER] . Use [UP] and [DOWN] to select the desired DMX address between 1 ( ‘A001’ )
and 512 ( ‘A512’ ) and press [ENTER] .
This setting is only relevant if the device is not controlled via a DMX controller and not working
as slave in a master / slave configuration. In this mode, the brightness of the white LEDs can be
adjusted and a Strobe effect can be engaged.
Press
[MODE] repeatedly until ‘C000’ appears in the display and press [ENTER] . Use [UP] and
[DOWN] to select the menu item ‘C1xx’ for the brightness or the menu item ‘CFxx’ for the
Strobe effect and press [ENTER] .
For the brightness, use [UP] and [DOWN] to select a value between ‘C101’ (minimum bright‐
ness) and ‘C199’ (maximum brightness) or ‘C100’ (blackout, LEDs off) and press [ENTER] .
For the Strobe effect, use [UP] and [DOWN] to select a value between ‘CF01’ (strobe frequency
approx. 1 Hz) and ‘CF99’ (strobe frequency approx. 30 Hz) or ‘CF00’ (continuous light, no
Strobe effect) and press [ENTER] .
DMX address
Operating mode ‘Manual con‐
trol’ (white LED model version)
Operating
Wild Wash Pro 648 LED RGB DMX, Wild Wash Pro 648 LED White DMX,
Wild Wash Pro 648 WW DMX
31