thomann STAIRVILLE Stage-PAR CX-3 RGBW 18x8W, Руководство пользователя

Страница: 29 / 48

Press the [M] button. Press one of the arrow keys repeatedly until the display shows ‘LINE’ .
Press the [OK] button. Press one of the arrow keys repeatedly until the display shows ‘MA’ .
Press the [OK] button. Now you can select one of the preprogrammed automatic shows. Use
the arrow keys to select a value between 1 and 42 (the display shows ‘P-01’ … ‘P-42’ ).
The automatic show can only be activated on the device that operates as ‘Master’.
This setting is only relevant if the device is not controlled via DMX. The device can operate in
standalone mode or control connected devices of the same type, that have to be configured as
‘Slaves’. When the display shows the desired value, press the [OK] button to confirm the selec‐
tion and then [M] to return to the higher menu level. To return to the higher menu level
without changes, press the [M] button.
Press the [M] button. Press one of the arrow keys repeatedly until the display shows ‘LINE’ .
Press the [OK] button. Press one of the arrow keys repeatedly until the display shows ‘SL’ . Press
the [OK] button. Now you can set the number of the device by which it is addressed as slave by
the master. Use the arrow keys to select a value between 1 and 512 (the display shows ‘A001’
… ‘A512’ ).
This setting is only relevant if the device is operated as slave by a master, but is not controlled
via DMX. When the display shows the desired value, press the [OK] button to confirm the selec‐
tion and then [M] to return to the higher menu level. To return to the higher menu level
without changes, press the [M] button.
Operating mode ‘Show/Master’
Operating mode ‘Slave’
Operation
Stage-PAR CX-3 RGBW18x8W
29