thomann Stairville Outdoor Stage PAR 12 x 3W WLA, Руководство пользователя

Страница: 24 / 44

7 Operating
7.1 Starting the device
Connect the device to the power supply to start operation. After a few seconds, the display
indicates that a reset is in progress. The device is then ready for use.
7.2 Main menu
Press [Mode] to activate the main menu and select an operating mode. Use [Up] and [Down] to
change the respectively displayed value. When the display shows the desired value confirm
with [Setup] . To return to the parent menu without making changes, press [Mode] .
If you don't press any button for about 20 seconds, the unit returns to the previously selected
mode. The set values are retained even when the device is disconnected from the mains
power supply.
In this mode, all preprogrammed shows are played consecutively in an endless loop. This set‐
ting is only relevant if the device is not controlled via DMX.
Use
[Mode] to open the main menu. Press [Up] or [Down] repeatedly until the display shows
‘Auto’ . Confirm the selection with [Setup] .
Operating mode Auto
Operating
24
Outdoor Stage PAR 12 × 3W WLA
LED PAR