thomann STAIRVILLE Outdoor Stage PAR 12 X 3W Tri, Руководство пользователя

Страница: 34 / 52

For programmes ‘Pr.02’ to ‘Pr.01’ , you can additionally set the speed for the transition from
one hue to the next. Use [UP] and [DOWN] to select a value between ‘slow’ and ‘fast’ (display
shows ‘d.001’ … ‘d.512’ ).
In automatic mode, all programmed shows are played sequentially in an endless loop.
Press
[Mode] repeatedly until the display shows ‘Auto’ . Confirm the selection with [Setup] . Now
you can use [UP] and [DOWN] buttons to select the programme speed in a range from ‘slow’ to
‘fast’ or ‘Flash’ (display shows ‘SP.01’ … ‘SP.99’ … ‘SP.FL’ ).
Confirm the selection with ‘Setup’ . For the option ‘Flash’ you can use [UP] and [DOWN] buttons
in the following menu to set the strobe speed in a range from ‘FS00’ to ‘FS99’ .
Confirm again with ‘Setup’ . In the following menu, you can use [UP] and [DOWN] buttons to set
the fade speed for the programmes in a range from ‘FS00’ to ‘FS99’ .
This setting is only relevant if the device is not controlled via DMX. When the display shows the
desired value press [OK] to confirm the selection and then [M] to return to the parent menu. To
return to the parent menu without making changes, press [M] .
Settings programme Pr.02 …
Pr.10
Operating mode ‘Auto’
Operating
LED PAR
34