thomann Stairville Octagon UV 36x3W, Руководство пользователя

Страница: 31 / 44

Press [M] . Press one of the arrow buttons repeatedly until the display shows ‘SET’ . Press [OK] .
Press one of the arrow buttons repeatedly until the display shows ‘STRO’ . Press [OK] . Now you
can adjust the strobe effect speed for the preprogrammed automatic shows ‘P-02’ … ‘P-04’ .
Use the arrow buttons to select a value between 0 (no speed) and 24 (high speed) (display
shows ‘S-00’ … ‘S-24’ ).
This setting is only relevant if the device is not controlled via DMX. When the display shows the
desired value press [OK] to confirm the selection and then [M] to return to the parent menu. To
return to the parent menu without making changes, press [M] .
Press the button [M] . Press one of the arrow buttons repeatedly until the display shows ‘LINE’ .
Press [OK] . Press one of the arrow buttons repeatedly until the display shows ‘-MA-’ . Press [OK] .
Now you can select one of the 4 preprogrammed automatic shows. Use the arrow buttons to
select a value between 1 and 4 (display shows ‘P-01’ … ‘P-04’ ).
The auto show can only be activated on the device that is configured as master.
This setting is only relevant if the device is not controlled via DMX. The device can operate in
stand-alone mode or control connected devices of the same type, that must be configured as
slaves. When the display shows the desired value press [OK] to confirm the selection and then
[M] to return to the parent menu. To return to the parent menu without making changes, press
[M] .
Strobe effect speed
Operating mode ‘Show/Master’
Operating
Octagon UV 36x3W
31