thomann StairVille MH-336, Руководство пользователя

Страница: 27 / 48

Press [MODE/ESC] , then [UP] or [DOWN] until the display shows ‘SETTING’ . Press [ENTER] . The
display starts flashing. Press the buttons [UP] or [DOWN] until the display shows ‘CHANNELS’ .
Press [ENTER] . The display starts flashing. Use the buttons [UP] or [DOWN] to select one of the
following DMX operating modes: 9-channel, 11-channel, 18-channel or 20-channel. This set‐
ting is only relevant if the device is controlled via DMX.
If the display shows the desired value, press
[ENTER] to save the setting and close the sub‐
menu. To close the sub and that main menu without changes, press [MODE/ESC] or wait ten
seconds.
This function allows you to set whether the display is constantly lit or whether it automatically
goes off 60 seconds after the last key operation.
Press
[MODE/ESC] , then [UP] or [DOWN] until the display shows ‘SETTING’ . Press [ENTER] . The
display starts flashing. Press the buttons [UP] or [DOWN] , until the display shows ‘DISPLAY’ .
Press [ENTER] . The display starts flashing. Use the buttons [UP] or [DOWN] to select ‘60s OFF’ or
‘Always on’ .
If the display shows the desired value, press [ENTER] to save the setting and close the sub‐
menu. To close the sub and that main menu without changes, press [MODE/ESC] or wait ten
seconds.
Operating mode ‘DMX’
Switching the display on and off
Operating
MH-336
27