thomann STAIRVILLE LED PAR56 24x3W RGB MKII, Руководство пользователя

Страница: 28 / 48

Press [M] . Press one of the arrow buttons repeatedly until the display shows ‘SET’ . Press [OK] .
Press one of the arrow buttons repeatedly until the display shows ‘dISP’ . Press [OK] .
To enable the blackout function press one of the arrow buttons repeatedly until the display
shows ‘OFF’ . Press [OK] . From now on the display goes out if you do not press a button within
a period of two minutes. Once you press any button, the display becomes active again.
To permanently turn on the display, press one of the arrow buttons repeatedly until the dis‐
play shows ‘ON’ . Press [OK] .
To return to the parent menu, press [M] .
Press [M] . Press one of the arrow buttons repeatedly until the display shows ‘SET’ . Press [OK] .
Press one of the arrow buttons repeatedly until the display shows ‘MAST’ . To configure the
device as Master use the arrow buttons to select the setting ‘ON’ . The device is now config‐
ured as Master and sets the movements and light effects which are copied by the devices con‐
figured as Slaves.
To return to the parent menu without making changes, press
[M] .
This setting is only relevant if the device is not controlled via DMX.
Display blackout
Operating mode ‘Master’
Operating
LED-PAR
28