thomann STAIRVILLE LED Bar 120/4 RGB DMX, Руководство пользователя, Страница: 34 / 56

This setting is only relevant if the device is controlled via DMX.
Press
[Mode] repeatedly until the display shows ‘dxxx’ . Press [Setup] . Now use [Up] and [Down]
to select one of the following DMX operating modes:
n
‘2-ch’ (two channels)
n
‘3-ch’ (three channels)
n
‘5-ch’ (five channels)
n
‘12-ch’ (twelve channels)
Wait about ten seconds until the display turns dark. Then the settings have been applied. To
return to the parent menu without making changes, press [Mode] .
This setting is only relevant if the device is serving as Slave in a Master / Slave configuration
and is not controlled via DMX.
Press
[Mode] repeatedly until the display shows ‘SLAv’ .
Wait about ten seconds until the display turns dark. Then the settings have been applied. To
return to the parent menu without making changes, press [Mode] .
DMX mode
Operating mode ‘Slave’
Operating
LED floodlight
34