thomann STAIRVILLE HL-x18 DCL CW/WW, Руководство пользователя

Страница: 32 / 44

Press [M] . Press one of the arrow buttons repeatedly until the display shows ‘SET’ . Press [OK] .
Press one of the arrow buttons repeatedly until the display shows ‘MIC’ . Press [OK] . Now you
can adjust the sensitivity of the built-in microphone for sound control. Use the arrow buttons
to select either ‘OFF’ (microphone off) or a value between 1 and 30 (display shows ‘M-01’ …
‘M-30’ ).
This setting is only relevant if the device is not controlled via DMX. When the display shows the
desired value press [OK] to confirm the selection and then [M] to return to the parent menu. To
return to the parent menu without making changes, press [M] .
Press [M] . Press one of the arrow buttons repeatedly until the display shows ‘TEST’ . Press [OK] .
Press one of the arrow buttons repeatedly until the display shows ‘COLD’ , ‘WARM’ or ‘STRO’ .
Press [OK] . Now you can set the brightness of the LEDs each in a range from 0 to 255, or select
the strobe rate in a range of 0 to 24.
This mode is also suitable to generate constant or flashing cold or warm white light without
DMX control.
When the display shows the desired value press
[OK] to confirm the selection and then [M] to
return to the parent menu. To return to the parent menu without making changes, press [M] .
Microphone sensitivity
Manual test
Operating
LED floodlight
32