thomann stairville DJ Lase Pro 1200 RGB, Руководство пользователя

Страница: 36 / 60

Press [FUNC] repeatedly until the display shows ‘MODE: SD SHOW dir’ . If there's a SD memory
card with stored show programmes in the card slot (14), you can select a directory on the
memory card using the [UP] and [DOWN] buttons. If the name of the desired directory appears
in the display, press [ENTER] to confirm.
Now you can determine, whether the device should run a single ILDA show (based on a *.ild
file) or a preprogrammed show (based on a *.prg file). Use the [UP] and [DOWN] buttons to
toggle between ‘MODE: SD: PRG SHOW’ and ‘MODE: SD: ILD SHOW’ . Then press [ENTER] to con‐
firm.
Now you can choose the file to be played from the current directory. Press
[UP] or [DOWN] until
the desired name appears in the display, then press [ENTER] to confirm.
The unit now starts running the show from the selected file in an endless loop.
Press [FUNC] repeatedly until the display shows ‘MODE: DMX’ , then press [ENTER] . Now you can
adjust the number of the first DMX channel (DMX address) used by the unit. Select a value
between 1 and 512 using the [UP] and [DOWN] buttons. Press [ENTER] to store the value and to
start operation in DMX mode.
Make sure that this number corresponds with the configuration of your DMX controller. As the
unit utilizes 13 DMX channels, the highest usable DMX start address is 500.
Operating mode ‘SD show’
Operating mode ‘DMX’
Operation
showlaser
36