thomann Stairville Big Par 24x12 HEX RGBAW/UV BL, Руководство пользователя

Страница: 31 / 48

Press [M] . Press one of the arrow buttons repeatedly until the display shows ‘TEST’ . Press [OK] .
Press one of the arrow buttons repeatedly until the display shows ‘CH1’ to ‘CH6’ or ‘STRO’ .
Press [OK] . Now you can set the brightness of the six basic colours, each in a range from 0 to
255, or select the strobe rate in a range of 0 to 24.
This mode is also suitable for generating constant or flashing light of a colour mixed from the
four LED colours without DMX control.
When the display shows the desired value press
[OK] to confirm the selection and then [M] to
return to the parent menu. To return to the parent menu without making changes, press [M] .
Press [M] . Press one of the arrow buttons repeatedly until the display shows ‘FADE’ . Press [OK] .
Now you can set the fade speed of the preprogrammed automatic shows. Use the arrow but‐
tons to select a value between 1 and 7 (display shows ‘F-01’ … ‘F-07’ ).
This setting is only relevant if the device is not controlled via DMX. When the display shows the
desired value press [OK] to confirm the selection and return to the main menu. To return to the
main menu without making changes, press [M] .
Manual test
Fade speed
Operating
Big Par 24x12 HEX RGBAW/UV BL Big Par 24x12 HEX RGBAW/UV BRS
31