thomann Stageworx BLS-315 Pro Lighting Stand B, Руководство пользователя, Страница: 16 / 24

1.
Unfold the feet of the stand until the cross braces are in a horizontal position.
2.
Fix this position with the safety screw on the slider to which the three feet are attached.
3.
Pull out the two safety pin and loosen the two safety screws on the extension tubes.
4.
Pull out the upper extension tube to the desired height and slide the safety pin through
the corresponding grid hole.
5.
Fix the position of the upper extension tube with the safety screw on the upper tube
clamp.
6.
Pull out the lower extension tube to the desired height and slide the safety pin through
the corresponding grid hole.
7.
Fix the position of the lower extension tube with the safety screw on the lower tube
clamp.
8.
Mount a spotlight or a speaker box. If necessary, screw the supplied adapter firmly to the
upper extension tube. Observe the instructions of the respective manufacturers. The
maximum load capacity of 30 kg in total must not be exceeded.
Setting up
Operating
16
BLS-315 Pro Lighting Stand B
speaker / light stand