thomann Quadro 500 DSP, Руководство пользователя, Страница: 21 / 36

Menu item Meaning
‘EQSETTING’ Opens the settings for the channel-wise switchable 8-band equalizer, the low-pass filter and the high-pass filter.
For each of the eight bands, the frequency (
‘FREQ’ ), the Q-shape ( ‘Q’ ), and the level boost / cut ( ‘Gain’ ) can be set.
Using the Bypass option ( ‘BP’ ), the equalizer for the respective frequency can also be switched off completely.
For each channel, the option ‘LP’ can be used to turn on a low-pass filter whose filter type and cut-off frequency
can be adjusted. Using the Bypass option ( ‘BPSS’ ), the low-pass filter for the respective input can also be switched
off completely.
For each channel, the option
‘HP’ can be used to turn on a high-pass filter whose filter type and cut-off frequency
can be adjusted. Using the Bypass option ( ‘BPSS’ ), the high-pass filter for the respective input can also be switched
off completely.
The option
‘ALLBYPASS’ makes it possible to completely switch off the entire tone control for the respective input
channel.
‘COMP’ Opens the settings for the channel-wise switchable compressor: Threshold ( ‘THRES’ ), attack time ( ‘ATTACK’ ),
release time ( ‘RELEASE’ ).
The option ‘BYPASS’ makes it possible to completely switch off the compressor for the respective input channel.
‘PRESET’ Allows to load and save presets and resetting to factory defaults
‘NOISEGATE’ Opens the settings for the channel-wise switchable noise gate
Operating
Quadro 500 DSP
21