thomann PA 4080 KB, Руководство пользователя

Страница: 27 / 36

If you route the effect signal from the [Effects Send] output into an external effects device, con‐
nect its outlet to the [Aux Input] to lead the processed signal back into the signal path.
You can connect a foot switch (not supplied) to the two-pole [FOOT SW] socket to turn the
internal reverb function on or off.
Connect the mains power connection via the supplied mains cable to an earthed mains power
wall outlet to supply the device with operating voltage.
When all connections are completed, turn on the [POWER] switch. The [Power On] LED then
lights up.
You can adjust the volume of the individual signals with the [Volume] controls in each channel.
The overall volume is set by the [Volume] control in the master section.
Turn the [Tone] control to shape the sound of the individual signals in each channel. There is
an additional 3-band EQ with [Low] , [Mid] and [High] controls for the overall signal in the
master section.
You can set the reverb level for each channel separately with the
[Reverb] controls. The overall
reverb level can be adjusted using the [Reverb] control in the master section.
Use the [Tape] control to adjust the playback volume of the device connected to the
[CD/Tape Play] sockets.
Turning on
Adjusting sound and volume
Operation
PA 4080 KB
27