thomann Millenium MPS-750X, Руководство пользователя

Страница: 24 / 60

The preprogrammed sounds of the drum module can be programmed to any of the connected
pads. So you can create user kits and store them in the device. To do so proceed as follows:
1.
First, call up one of the available drum kits (see previous chapter) and use [EDIT] to
switch to Edit mode.
2.
Hit the pad (Trigger) to which you want to programme a certain sound or press [DRUM]
repeatedly until the desired pad is shown on the display. Additionally select the specific
trigger for multiple assigned pads.
3.
Use [PAGE DOWN] or [PAGE UP] to successively open the following selection menus and
use the rotary control [–] / [+] or the buttons [–] | [+] to adjust the settings for the acti‐
vated trigger.
Selection menu Value range
VOICE TYPE Kick, Snare, Tom, Ride, Crash, Hi-Hat, Metro, Extras
VOICE Voice selection, see
VOLUME Volume
REVERB Reverb effect
PITCH Pitch
PAN Position within the stereo signal (panorama right / left)
4.
Quit the selection menu with [EXIT] .
ð
Use [–] | [+] in the following saving dialogue to specify the memory location. Existing
data will be overwritten.
Customising a drum kit
Operating
24
MPS-750X
E-Drum Module