thomann Limit 2/2, Руководство пользователя

Страница: 14 / 28

5 Starting up
Connect the line outputs (left and right) of the audio device whose level is to be limited (for
example, your mixer) to the inputs of the limiter. Connect the outputs of the limiter to the line
inputs of your amplifier.
Connect the limiter to the power supply and switch it on. Test the threshold setting until the
amplifier is protected against overloading, but the limiting of the signal dynamics is only as
little as possible. To protect your speakers, proceed cautiously from an initially strong limiting
towards lower settings. If it is technically possible in your system, please try without connected
speakers first. Observe the operating instructions of the amplifier.
Starting up
limiter
14