thomann LED EXPO 310 - 2700 K, Руководство пользователя

Страница: 29 / 44

Press [MODE] . Press [UP] or [DOWN] repeatedly until the display shows ‘Personal’ . Press
[ENTER] . Use [UP] or [DOWN] to select the submenu ‘Status’ . Press [ENTER] . Use [UP] or [DOWN]
to select the submenu ‘No DMX’ . Press [ENTER] . Use [UP] or [DOWN] to select between ‘Hold’
(the last received DMX value will be retained if the DMX signal is missing), ‘Open’ (all values
will be set to 255 if the DMX signal is missing) and ‘Save’ (all values will be set to zero –
blackout if the DMX signal is missing).
Confirm your selection with
[ENTER] . Use [MODE] to return to the parent menu.
Press [MODE] . Press [UP] or [DOWN] repeatedly until the display shows ‘Adjust’ . Press [ENTER] .
Use [UP] or [DOWN] to select the submenu ‘Test’ . Press [ENTER] twice. Use [UP] or [DOWN] to
adjust the brightness in a range of 0 % (display shows ‘000’ ) to 100 % (display shows ‘255’ ).
This setting is only relevant if the device is not controlled via DMX.
Confirm your selection with
[ENTER] . Use [MODE] to return to the parent menu.
Press [MODE] . Press [UP] or [DOWN] repeatedly until the display shows ‘Personal’ . Press
[ENTER] . Use [UP] or [DOWN] to select the submenu ‘Default’ . Press [ENTER] . The device per-
forms a reset.
Selecting the behaviour on
missing DMX signal.
Brightness setting
Resetting to basic settings
Operating
LED EXPO 310 6300 K, LED EXPO 310 2700 K
29
LED spotlight