thomann Ignition Pure UV 710, Руководство пользователя

Страница: 32 / 52

Press [MENU] . Press one of the arrow buttons repeatedly until the display shows ‘Slave’ . Press
[ENTER] . Press one of the arrow buttons repeatedly until the display shows ‘Yes’ . Press [ENTER] .
The device is now working in slave mode, i.e. it will exactly copy the movement of the control‐
ling master device, correct wiring provided. This setting is only relevant if the device is oper‐
ating as Slave controlled by a Master, but not via DMX.
Press [MENU] . Press one of the arrow buttons repeatedly until the display shows ‘Settings’ .
Press [ENTER] . Press one of the arrow buttons repeatedly until the display shows ‘Frequency’ .
Press [ENTER] . Now you can set the LED repetition rate. Use the arrow buttons to select a fre‐
quency from slow to fast (display shows ‘3K’ , ‘6K’ , ‘12K’ or ‘24K’ ). When the display shows the
desired value press [ENTER] to confirm the selection.
Press [MENU] . Press one of the arrow buttons repeatedly until the display shows ‘Settings’ .
Press [ENTER] . Press one of the arrow buttons repeatedly until the display shows ‘Display
Reverse’ . Press [ENTER] . Now you can set the reversal of the display. Use the arrow buttons to
select ‘On’ to rotate the display by 180 °. Use the arrow buttons to select ‘Off’ to rotate the
display to the default position. When the display shows the desired value press [ENTER] to con‐
firm the selection.
Operating mode ‘Slave’
LED repetition rate (PWM)
Display reversion
Operating
32
Pure UV 710
LED PAR