thomann Harley Benton HB-160B, Руководство пользователя

Страница: 18 / 32

7 [COMPRESSOR]
Pressure switch for enabling the built-in compressor.
The
[ACTIVE] LED lights permanently during operation, when the compressor is enabled. The [ON] LED indicates that
the compressor circuit is active and processes the signal. The signal level at which the compressor processes the
signal is affected by the gain controls (the higher the gain, the more the signal is compressed).
8 [7-BAND EQUALIZER]
Use the sliders of the equalizer to shape the sound of the amplifier depending on the frequency. In the zero position,
the signal is reproduced unchanged.
9 [LIMIT OFF]
Pressure switch for enabling or disabling the built-in limiter.
The limiter monitors the signal level of the amplifier and detects the impedance of a connected speaker automati‐
cally. The protection circuit is automatically activated when the unit is turned on and attenuates an excessive output
level to an uncritical level to avoid distortion.
10 [VOLUME]
Overall volume control.
Connections and controls
bass combo
18