thomann 513822, Руководство пользователя

Страница: 34 / 52

Menu item Values Explanation
‘SetLock’ ‘YES’ / ‘NO’ Lock activated or deactivated. If the lock is activated, no
changes can be made to the settings.
‘Net’ ‘01’ … ‘64’ ACT bus interface to set the address
‘Version?’ Display of the current firmware version
‘Exit&Safe’ Saving changes and back to the main menu
1.
Press the buttons (6) to set the input level to 0.
2.
Activate the audio source and set the output level to maximum.
3.
Observe the indicator LEDs (5) and adjust the gain with the buttons (6) until the green
LED [OK] lights up.
ð
The orange LED [LOW] indicates that the audio input signal or gain is too low.
The red LED [PEK] indicates that the audio input signal or gain is too high. If the
audio input signal stays too high, the warning message ‘CLIP !’ appears on the dis‐
play to indicate the distortion. Check for excessive input signal level.
Setting input level
Operating
UHF wireless system
34