Single Head Led Light
8
Light
diodes
Light
head
Goose-
neck
Base
Clamp
0-25 mm
Press
button
with 2
switch
levels
Battery
case
(3 x AAA)
By repeated pressing of the
press button the
brightness is controlled:
Initial position = Light OFF
The switching cycle
begins again
Press 1x
= full brightness
Press 2x
= less brightness
Press 3x
= Light is turned OFF
1. Equipment & Dimensions
2. Batteries/rechargeable batteries insert or change
3.a to the PLATES
3.b to NOTE HEADS
3.c on TABLES
3.c
and TRAYS
3. Placement of the lamp
4. Turn Light On/Off
5. Adjust the Light Head
2.a
Battery case lid:
Slide the lid with your thumb
(approx. 6 mm) in the direction
of the arrow
3.a.1
Press the clamp and slide the
music desk or other plate
(max. 20 mm)...
The highly flexible gooseneck can be used to quickly place
the light in the desired position - and it will stay there until it
is adjusted again.
3.a.2
...until the plate reaches
the inside of the lower end
of the clamp
3.b.1
Press the clamp and slide
the Lyra placed in the middle
of the note head...
3.b.2
...until the plate rea-
ches the inside of the
upper end of the clamp
3.c.2
To attain optimal balance
adjust the gooseneck and the
light head a bit
3.c.1
Place the lamp foot
/base on a level
surface. Four
points of support
ensure stability
2.b
Unlock the lid and lift
2.c
Insert three batteries (AAA-1.5V) i.e.
rechargeable batteries (AAA-1.2V);
(please pay attention to the polls +/-)
2.e
Slide the lid with your thumb
over the opening until both
hooks click into place
2.f
After the “click” ensure
that the lid is securely in place
2.d
Place the lid on the compartment
