thomann 442430, Руководство пользователя

Страница: 12 / 20

1.
Unfold the feet of the tripod until the cross braces are in a horizontal position.
2.
Fix this position with the safety screw on the slider to which the three feet are attached.
3.
Loosen the locking screw of the crossbar, place the crossbar on the tripod mounting and
tighten it with the locking screw.
4.
Loosen the two screws on the extension tubes.
5.
Pull out the upper locking screw and pull out the upper extension tube to the required
height and let the locking pin of the locking screw engage in the corresponding grid
perforation.
6.
Fix the position of the upper extension tube with the safety screw on the upper tube
clamp.
7.
Pull out the lower locking screw and pull out the lower extension tube to the required
height and let the locking pin of the locking screw engage in the corresponding grid
perforation.
8.
Fix the position of the lower extension tube with the safety screw on the lower tube
clamp.
9.
Attach up to four spotlights to the crossbar. Observe the instructions of the respective
manufacturers. The maximum load capacity of 20 kg in total must not be exceeded.
Setup
Operating
lighting stand
12