thomann 406531, Руководство пользователя

Страница: 30 / 44

Press [M] . Press one of the arrow buttons repeatedly until the display shows ‘SET’ . Press [OK] .
Press one of the arrow buttons repeatedly until the display shows ‘MIC’ . Press [OK] . Now you
can adjust the sensitivity of the built-in microphone for sound control. Use the arrow buttons
to select either ‘OFF’ (microphone off) or a value between 1 and 30 (display shows ‘M-01’ …
‘M-30’ or ‘OFF’ ).
This setting is only relevant if the device is not controlled via DMX. When the display shows the
desired value press [OK] to confirm the selection and then [M] to return to the parent menu. To
return to the parent menu without making changes, press [M] .
Press [M] . Press one of the arrow buttons repeatedly until the display shows ‘TEST’ . Press [OK] .
Press one of the arrow buttons repeatedly until the display shows ‘RED’ , ‘GREE’ , ‘BLUE’ , ‘WHIT’
or ‘STRO’ . Press [OK] . Now you can adjust the brightness of the red, green, blue or white
(RGBW) resp. warm white (RGB WW) LEDs in a range from 0 to 255, or select the strobe rate
from a range of 0 to 24.
This mode is also suitable for generating constant or flashing light of a colour mixed from the
four LED colours without DMX control.
When the display shows the desired value press
[OK] to confirm the selection and then [M] to
return to the parent menu. To return to the parent menu without making changes, press [M] .
Microphone sensitivity
Manual test
Operating
LED PAR
30