thomann 296161, Руководство пользователя

Страница: 35 / 52

If you don't want to synchronise the transmitter via the infrared interface with the receiver, you
can also set the transmission frequency manually in the configurable frequency group (user
bank).
1.
Press [SET] repeatedly until the value in the GP field of the display is flashing.
2.
Use [SEL] to select the frequency group.
Press [SET] to confirm the selection.
ð
The digit in the CH field is flashing.
3.
Use [SEL] to select a channel within the adjusted frequency group.
If you have selected the frequency group ‘U’, you can directly set the frequency using
[SEL] . First, set the value to the left of the decimal point, then press [SEL] and after that
set the value to the right of the decimal point.
Press
[SET] to confirm the selection.
ð
After a few seconds the display will return to the default state.
Frequency selecting
Operating
free solo HT
35