thomann 278617, Руководство пользователя

Страница: 28 / 48

Press [M] . Press one of the arrow keys repeatedly until the display shows ‘LINE’ . Press [OK] .
Press one of the arrow keys repeatedly until the display shows ‘MA’ . Press [OK] . Now you can
select one of the 41 preprogrammed automatic shows. Use the arrow keys to select a value
between 1 and 42 (the display shows ‘P-01’ … ‘P-42’ ).
The automatic show can only be activated on the device that operates as ‘Master’.
This setting is only relevant if the device is not controlled via DMX. The device can operate in
standalone mode or control connected devices of the same type, that have to be configured as
‘Slaves’. When the display shows the desired value, press [OK] to confirm the selection and
then [M] to return to the superordinate menu. To return to the superordinate menu without
changes, press [M] .
Press [M] . Press one of the arrow keys repeatedly until the display shows ‘LINE’ . Press [OK] .
Press one of the arrow keys repeatedly until the display shows ‘SL’ . Press [OK] . Now you can set
the number of the device by which it is addressed as slave by the master. Use the arrow keys to
select a value between 1 and 512 (the display shows ‘A001’ … ‘A512’ ).
This setting is only relevant if the device is operated as slave by a master, but is not controlled
via DMX. When the display shows the desired value, press [OK] to confirm the selection and
then [M] to return to the superordinate menu. To return to the superordinate menu without
changes, press [M] .
Operating mode ‘Show/Master’
Operating mode ‘Slave’
Operation
LED PAR
28