T.BONE • IEM 100 - 800 / 100 - 863 MHZ
www.thomann.de
9
Receiver setup
Frequency group and channel selection:
Press the SET button, until the GROUP
indicator flashes. Now use the
/
buttons, to choose the same group as
previously set up in that transmitter, which
has to supply this receiver. Refer to the
illustrations shown on the left.
Then press the SET button again, until the
CHANNEL indicator flashes. Now use the
/
buttons, to select the same channel as
previously set up in that transmitter, which
has to supply this receiver.
HF setting:
Press the SET button repeatedly, until the
HF indicator (high frequency) flashes. If
you activate this function using the
/
buttons, the frequencies around 10 kHz will
be raised by 6 dB. When deactivated, the
frequency response remains unchanged.
The lock function:
Press the SET button repeatedly, until the
symbol appears. Now press the
or
button to release or lock the unit. A locked
unit allows you to view the settings, but not
to change them.
