3-4
3. Assembly
3.
Assembly
Ball Spline
3-3
Installing the Spline Shaft
When installing the spline shaft into the spline nut, identify the matching marks (Figure 3-4) on
the spline shaft and the spline nut, and then insert the shaft straight while checking their relative
positions.
Note―that―forcibly―inserting―the―shaft―may―cause―balls―to―fall―off.
If the spline nut is attached with a seal or given a preload, apply a lubricant to the outer surface
of the spline shaft.
Matching
mark
Matching mark
Matching mark
Matching mark
Matching mark
Serial number
Serial number
Figure 3-4 Installing the Spline Shaft
www.thk.ru
тел. +7(499) 703-39-86
