E
D
A
B
C
F
G
H
BRACKET
LEVELER
I
J
THIS END UP FURNITURE CO.
P.O. Box 5410 Sanford, North Carolina 27331
(800) 605-2130 (919) 774-7474 Fax (919) 774-7430 www.thisendup.com
June 2015
TOOLS NEEDED
1 - 9/16" SOCKET & RATCHET
1 - FLAT HEAD SCREWDRIVER
1 - PHILLIPS HEAD SCREWDRIVER
PARTS LIST
A - TABLE TOP
B - TABLE LEG
C - CENTERBOARD
D - 5" LAG BOLT (4)
E - WASHER (4)
F - 4-1/2" MACHINE BOLT (4)
G - 1/4" WASHER (8)
H - WING NUT (4)
I - TABLE BRACE(1)
J - 1-1/2" SCREW (10)
ASSEMBLY INSTRUCTIONS
1. Place table top (A) face down on floor.
2. To assemble base, attach legs (B) to centerboard (C) using (4) 5" lag
bolts (D) and (4) washers (E). Do not tighten lag bolts completely.
3. Lower base upside down onto top (A).
4. Line up holes in base with holes in brackets on the underside of table
top (A).
5. Attach using (4) machine bolts (F) with (8) washers (G) and (4) wing
nuts (H). Make sure nuts are tight.**NOTE: MAKE SURE UPPER
CROSSMEMBERS OF LEGS (B) ARE TIGHT AGAINST THE
UNDDERSIDE OF TOP (A).
6. Fully tighten lag bolts (D).
7. Attach Table Brace (I) between legs with (10) screws (I) to underside
of top.
8. Turn table into upright position.**NOTE: IF TABLE ROCKS, THERE
ARE LEVELERS ON THE BOTTOM OF THE BASE. THESE CAN
BE UNSCREWED BY HAND TO LEVEL THE TABLE.
Dining Room Table Assembly Instructions
Large Dining Room Table
