Power Output Port
Plug power output line into Power Output Port and it will
power the Smart Speaker.
Reset
Restart
To restart RealityAdapter, short press the Reset hole with
a small needle and Wi-Fi LED will slow blinking. After
RealityAdapter connects with Wi-Fi, Wi-Fi LED will be
lighting on.
(Smart Speaker connecting with RealityAdapter will not be
affected by the Restart process.)
Factory Reset
To restore factory setting, long press the Reset hole with
a small needle more than 5 seconds until the Wi-Fi LED
turns off. Then take out the small needle and wait a few
seconds
，
the Wi-Fi LED will become fast blinking later.
Attention
:
The Power Output Port is a proprietary port for the
accessory cables. Do not plug USB Type-C connector into it.
Power Output Port
Reset
