Overview of SNAP G features
17
Head tacker button/buzzer operation
Refer to the table below for using the head tracker button.
Product operation
Button operation
LED status
Buzzer after connecting
the product
Power on/connection
standby state
Press for 2 seconds
(power off)
White LED on
No sound
Power off
Long press
(power on)
Off
2 short + 1 long buzz
Attempting to connect to
the product
-
White LED flickers
1 short buzz each second
Completed connection
with the product
-
Blue LED flickers once
every 3 seconds
1 short + 1 long buzz
Viewpoint correction start
Double press
Blue LED on
1 long + 1 short buzz
Viewpoint correction
complete
Double press
(after entering viewpoint
correction)
Blue LED flickers once
every 3 seconds
1 long buzz
Calibration start/in
progress
Short press and long press
or three short presses
White LED flickers once
every 2 seconds
1 long + 2 short buzzes
Calibration complete
-
-
1 long buzz
Shooting photo
Short press
(power on)
Blue LED flickers twice
1 short buzz
Recording video
Blue LED flickers
2 short buzzes
Stop recording video
Blue LED flickers once
every 3 seconds
3 short buzzes
Low battery
-
Red LED flickers
2 short buzzes per second
Charging
-
Red LED on
No sound
Charging complete
-
Off
No sound
• Head tracker button operation is subject to change.
• Button operation and buzzer sound are subject to change.
3.5 Using dynamic motion recording mode
With the dynamic motion function, you can specify up to 4 recording points, and set the path and time to
record before recording.
Dynamic motion recording mode
1
On the Video Preview screen, touch the (
) button
>
motion settings
.
2
Set the time to record. The video length is automatically calculated and displayed based on the video
settings value (speed, interval).
3
After setting the recording time, touch the (
) button to return to the Motion Settings screen, and
then touch the (
) button in the upper-right corner to move to the Route Settings screen.