Thinkware FA10, Руководство пользователя

Страница: 9 / 24

7
Getting S
tar
ted
01
To ensure that the mount is safely secured, it is recommend-
ed that you separate the device from the mount after instal-
lation and press the mount towards windshield for 5 minutes
to maintain pressure. Allow 24 hours until the adhesive on
the mount has set before connecting the dash cam.
TIP
1-5-1. Connecting the Device and the
Mount
Align the mount with the connector (A), and slide it
towards (B) until it clicks into place.
Remove the protective film from the camera lens.
1-5. Vehicle Installation
1-5-2. Installing the Device
Clean the area on the windshield where the dash
cam will be installed.
With dash cam main unit still attached to the
mount, remove the protective tape from the back
of the mount.
Attach the adhesive side of the mount on the
windshield where it has an unobstructed view of
the road but does not interfere with the driver’s
view.
The camera is located on the right side of the main unit
so install the dash cam on the left of center behind the
rearview mirror.
TIP