ENGLISH
Avvertenze per l’installazione:
Connections:
1
2
3
4
5
1 - Power supply connector
2 - Power supply LED
3 - Ethernet port
4 - KNX activity LED indicator (flashes
when KNX telegram is received)
5 - EIB/KNX connector (respect polarity)
First configuration:
Main configuration of the server is via web console. To reach web console an internet browser must
be used (Firefox or Chrome is recommended). Please write the following address into browser
address bar :
http://<ip-address>:5051
where ip-address is the one taken by the server.
To login for the first time use following credentials:
User :
service
Password :
password
To find the IP address of the server a search utility is available and can be downloaded from
www.thinknx.com
Server is configured to use DHCP. If DHCP fails server will acquire address:
192.168.0.200
To restore the factory settings, press the RESET button at the bottom of the device for at least 10
seconds and wait until the KNX telegrams LED (4) stops blinking.
- Use only supplied connector to connect with the KNX bus.
- Remove power form server during electrical connections.
